Wright Products Patio Surface Mount is used to upgrade or replace damaged, missing or worn-out surface mounts. It features an aluminum finish with wood pull and hook latch for added security. Mount on non-handed for right or left-hand doors measuring 1 in. thick and in 3-15/16 in. center to center hole spacing.
- For doors 1" thick
- Installs in 3-15/16" center to center hole spacing
- Contains a hook latch for added security
- All installation hardware included
- Inside wooden handle 9" x 1"
- Outside handle 6-1/2" x 7/8"
When installing inside handle on door, the latch lever must point down. If latch lever does not point down, carefully remove the retaining screw while supporting the hook latch from underneath. Remove latch lever, rotate it 180 degrees, replace, and secure with retaining screw. This will stop the locking lever from falling into a locked position when door closes.
