Universal Hardware Light Duty Storeroom Lever is designed for doors where the outside should remain locked at all times such as storage rooms or mechanical rooms. The deadlocking latch bolt is operated by the inside lever at all times. A key is used to retract the latch bolt and open the outside. When the key is removed, the outside will lock. The inside lever is unable to lock or unlock the outside lever. The Storeroom Lever comes with a 5-Pin SC1 cylinder and brass plug to provide added security and peace of mind. Equipped with tubular chassis for easier installation, this lever will fit wood or metal doors 1-3/8" to 2" thick. The Light Duty Keyed Storeroom Lever features 3-3/4" solid zinc diecast levers, an ANSI Grade 2 rating that's tested to exceed 500,000 cycles, a 3 hour fire rating (UL Listed) and is ADA compliant for light commercial and residential use. A T-strike, full lip strike, 2 keys, mounting hardware and installation instructions are included. Note: There is no push botton on the inside lever so outside lever cannot be left unlocked. A key is always required for entry.
- Storeroom function allows for operation of latch bolt with use of a key. Key is required for entry at all times. Key cannot be removed when unlocked
CONSTRUCTION
- Equipped with 3-3/4" solid zinc diecast levers
- Sleek satin chrome finish
DURABILITY
- ANSI Grade 2: Tested to exceed 500,000 cycles
- UL Listed: 3 Hour fire rated for added protection and meeting building requirements
- Included 5-Pin SC1 Cylinder, brass plug and 2 keys for added security and piece of mind
- ADA Compliant: Meets ADA requirements, ensuring accessibility to all disabled persons
- Full lifetime warranty covers finish and function
INSTALLATION
- Door Type: Wood or Metal doors 1-3/8"-2" thick
- Non-Handed: Can be applied to left or right handed doors
- Adjustable latch fits 2-3/8" or 2-3/4" backset
- Tubular chassis lever helps simplify installation
- Included hardware: Mounting screws, 2 keys and installation instructions
If key does not release from lock once installed the cylinder has been installed with the tailpiece out of phase.