KEEPER®'s Rotating D-Ring Anchor Point has a 1,666 lbs. working load limit and a 5,000 lbs. break strength. The rotating feature provides straight angles for Tie-Downs.
- Rotating D-Ring Anchor Point
- Provides Straight Angle for Tie Downs
- 1666lb Working Load Limit
- 5000lb Break Strength
- Zinc Plated
- 5/16” diameter bolt required to anchor
The anchor point has two sets of holes – one in the recessed area and one in the flange area
Recessed – hole for #12 screw (0.22” diameter) in a square pattern with 2.5” per side
Flange – hole of 5/16” screw (.34” diameter) in a square pattern with 3.75” per side
The flange’s set hole spacing is 3.75” x 3.75”