Control the traffic in/out of your space and automatically close door after every opening. The door closer is size 1 and has a 80-degree opening range. Mount closer in parallel only. This door closer is for interior residential and commercial door applications.
- Automatic Hold Open feature engages at an 80 degree opening
- Recommended for interior doors up to 30"
- Adjustable closing speed
- Parallel mount only
- ADA compliant
- 5" hole spacing
Q: Why doesn't the door close after opening all the way?
A: This door closer has a built in, non-adjustable hold open feature. If the door is opened beyond 85 degrees, the door will remain open until it is pulled back to less than the 85 degrees, then it will close automatically.
Q: Can I disable the hold open feature?
A: The hold open feature is built in, the only way to not engage it is to open the door less than 85 degrees.
Q: After installing the closer the door will not open?
A: Make sure the arm was assembled to the closer and bracket while the door is in a closed position. Installing while the door is open changes the angle and prohibits the door from opening.
Q: Can I install this closer on the pull side of the door?
A: No, this model must be installed on the push side.
Q: Hold open isn't working at 85 or 90 degrees, barely at 100 degree.
A: The closer the elbow of the arm assembly to the door itself when closed increases the hold open degree. If you can position the P or L bracket to draw the elbow further away from the door, this should decrease the hold open degree.
Old Style - Instructions 95055000
New Style - Instruction 999-30010 found on upper right hand corner of instructions and there are closer body markings, T1