This solid brass hold open doorstop is an easy solution to protecting your door, walls and people on the other side of the door. Comes with a hook and fastener for the back of the door to allow it to be held open. This stop is finished to match other Brinks Commercial products.
- 2-1/2 in. Diameter
- 3-5/8 in. Height
- Solid brass
- Holding anchor/Hook
- Fasteners and anchor included
- Floor mounted
- Rubber bumper
Includes:
Recommendations:
1. Locate stop between 2” and 10” from HINGE SIDE door edge .
2. When inserting concrete anchor the flanged end goes into hole first.
5. The 5/16” pilot hole callout in Step 5 applies to installation using the supplied plastic threaded inserts that would be used in a hollow door. For an installation of #12 wood screws, the pilot hole can vary from about .140” for hard wood to .219” for soft wood and fiberglass