To keep your winch in top running condition we offer the 12V Switching Solenoid that works with the KT2500, KT3000, and KT4000 models. The Replacement Solenoid can be mounted anywhere within a 4 ft. range. This allows for custom mounting positions based on the application in which the winch is being used.
- Controls in and out winch direction
- Mounts within a 4 ft. range
- Works with KT2500, KT3000(S), and KT4000(S)
Solenoid notes.
Our KT2500, KT3000, and KT4000 has a solenoid that requires remote mounting as shown in the owner’s manual picture below. The solenoid is not mounted to the winch.
Is the solenoid defective?
Does it winch in one direction or the other? Is it making a clicking noise?
Almost always when it is the solenoid, the winch will still work in one direction or the other and click when trying to winch in the direction of failure. Since yours is not making a clicking noise, or working in either direction and you've tested the battery we are lead to believe its a connection issue.
Please check for poor connection(s) and that all wiring is tight and clean. Also, check that switch wires are connected properly to the solenoid. Let us know the results once you have checked. If your winch still will not work we may ask you to call our Winch Engineer or he can call you if preferred.