UH40131 INDICATOR DEADBOLT

The Universal Hardware Medium-Duty Indicator Deadbolt is a great option for restrooms, fitting rooms, or any room where privacy is needed. The inside locks and unlocks using a turn dial and a "vacant" or "occupied" message is displayed on the outside. The deadbolt features a privacy override option on the outside for safety purposes in the event of an emergency. It meets ANSI Grade 2 standards and is tested to exceed 150,000 cycles. This deadbolt easily installs on doors that are 1-3/8" - 1-3/4" thick and has an adjustable latch that fits 2-3/8" or 2-3/4" backset.

• Meets ANSI Grade 2 Standards and exceeds 150,000 cycles
• Fits wood or metal doors 1-3/8" to 1-3/4" thick
• Adjustable latch fits 2-3/8" or 2-3/4 backset
• Privacy override for safety during emergencies
• Indicator window displays "vacant" or "occupied" when in/not in use
• Full Lifetime warranty included

Privacy override for safety during emergencies is unlocked by inserting a coin or flathead screwdriver and rotating.

The drilling/hole template is included in the instructions at the bottom of the back sheet. It can be installed on a hollow steel door; the unit requires a standard 2-1/8” bore thru the main door and a 1” latch hole. However, the mortise for the latch can’t be chiseled, of course. It is probably built into the door already. If not, it probably will require cutting a rectangular section and welding support tabs for the latch with threaded holes. This usually requires a pro, and we don’t cover that in our instructions. The same situation applies for the strike; I’m assuming the door frame is aluminum or steel. If they have additional questions and/or pictures, please send them.